- Email:
- trinhxuantruong1996@gmail.com
- Phone:
- (+84) 38 414 5103
- Address:
- VIETNAM
FLUKE 45 Dual Display Multimeter
- in SAFETY EQUIPMENT
- March 09, 2024
FLUKE 45 Dual Display Multimeter
How to use multimeter? If you are familiar with this type of measuring instrument for the first time, you will surely have different questions. Today, I will introduce to you about the 45 Dual Display Multimeter product line of FLUKE.
So why is it called multimeter and dual display:
+) Dual display, vacuum fluorescence, allowing two properties of the input signal
are displayed at the same time. (e.g. AC voltage in a display and frequency in
is different).
+) True-rms voltage and current, including AC + DC.
+) Standard RS-232 interface or IEEE-488 interface.
+) Measurements of frequencies greater than 1 Mhz.
+) The meter can measure voltage (AC, DC), current (AC, DC), value of Ω, frequency, diode....
Procedure and instructions on how to measure:
1. Measure voltage, resistance or frequency
To measure voltage, resistance or frequency press the function button you want to measure and connect the test leads as shown in the figure below.
2. Measure current
To measure current, insert the test leads into the 100 mA input or the 10 A input. Press the function button and connect the leads as shown below.
So why is it called multimeter and dual display:
+) Dual display, vacuum fluorescence, allowing two properties of the input signal
are displayed at the same time. (e.g. AC voltage in a display and frequency in
is different).
+) True-rms voltage and current, including AC + DC.
+) Standard RS-232 interface or IEEE-488 interface.
+) Measurements of frequencies greater than 1 Mhz.
+) The meter can measure voltage (AC, DC), current (AC, DC), value of Ω, frequency, diode....
Procedure and instructions on how to measure:
1. Measure voltage, resistance or frequency
To measure voltage, resistance or frequency press the function button you want to measure and connect the test leads as shown in the figure below.
2. Measure current
To measure current, insert the test leads into the 100 mA input or the 10 A input. Press the function button and connect the leads as shown below.
Video: